ANALYSIS OF FACTOR‘ EFFECTS IN RELATION TO VIBRATIONS ON THE TECHNOLOGICAL HEAD DURING CONSTRUCTION STEELS SPLITTING BY HYDRO ABRASIVE SPLITTING

  • Stefania Salokyova Faculty of Manufacturing Technologies, Department of ManufacturingProcessesOperation
Keywords: Material cutting, abrasive water jet, feed rate, technological head, vibration

Abstract

The article is focused on evaluation of the effects of factors of technology of high speed hydro abrasive jet during splitting of construction steels 12 050 and 11 523 by the means of factor experiment. This experiment observed the effect and significance of two selected factors (type of material and movement speed of the technological head). Measured values are displayed through graphic and numeric dependencies, based on which new knowledge and recommendations for operators are formulated. In conclusion contributions are matched basic parameter vibration - RMS and Peak to peak.The basic goal of vibration observation is to provide basic information about the operation and technical state of the device in production system.

References

1. Arola, D., Ramulu, M.: Mechanism of material removal in abrasive waterjet machining of common aerospace materials. In.: Proceedings of the seventh American waterjet conference. Seattle, p. 43-46, (1993)
2. Babu, K. M., Chetty, O.V.K.: A study on the use of single mech size abrasives in abrasive waterjet machining. In.: International Journal of Advanced Manufacturing Technology. (29), p. 532-540, (2006)
3. Hashish, M.: Modelling study of metal cutting with abrasive waterjet. In.: J Eng Mater Technol., p. 88-100, (1984)
4. Valíček, J., et al.: Experimental analysis of irregularities of metallic surfaces generated by abrasive waterjet. In.: International Journal of Machine Tools and Manufacture. Vol. 47. no. 11., p. 1786-1790, ISSN 0890-6955, , (2007)
5. Híreš, O.: Štúdium drsnosti a kolmosti rezu. In.: Nové smery vo výrobných technológiach. Košice TU-FVT, p. 203-208, ISBN 80-8073-554-09 , (2006)
6. Chao, J., Geskin E.: Experimental study of the striation formation and spectral analysis of the abrasive waterjet generated surfaces. In.: Proceedings of the seventh American waterjet conference. Seattle. Washington, p. 27-41, (1993)
7. Chem, F. L., Siores, E., Patel, K.: Improving the cut surface qualities using different controlled nozzle oscillation techniques. In.: International Journal of Machine Tools and Manufacture. Vol. 42, p. 717-722, , (2002)
8. Salokyová, Š.: Analysis, modelling and simulation of vibrations in manufacturing systems with water jet technology (Analýza, modelovanie a simulácia vibrácií vo výrobných systémoch s technológiou vodného prúdu), Dissertation. Prešov, 303 p. (in Slovak), , (2012)
9. Jacko, P.: Modelling and simulation of technological parameters related to usage of non-traditional abrasives in AWJ technology (Modelovanie a simulácia technologických parametrov v nadväznosti na použitie netradičných druhov abrazíva v technológii AWJ), Dissertation. Prešov, 163 p. (in Slovak), (2011)
10. Bičejová, Ľ.: Modelling and simulation of operational conditions influencing the formation and extent of vibrations in manufacturing systems (Modelovanie a simulácia vplyvu prevádzkových podmienok na vznik a rozsah vibrácií vo výrobných systémoch), Dissertation. Prešov, 184 p. (in Slovak), (2010)
11. Kaličinský, J.: Control of technological parameters of liquid jet in violation of materials (Řízení technologických parametrů kapalinového paprsku při porušování materiálů). Dissertation. Ostrava, 133 p. (in Czech), (2009)
12. Gembalová, L.: Determine the physical - mechanical properties of the material breach of its liquid jet (Určovaní fyzikálně – mechanických vlastností materiálu z jeho porušení kapalinovým paprskem). Dissertation. Ostrava, 120 p. (in Czech), (2010)
Published
2015-03-31
How to Cite
Salokyova, S. (2015). ANALYSIS OF FACTOR‘ EFFECTS IN RELATION TO VIBRATIONS ON THE TECHNOLOGICAL HEAD DURING CONSTRUCTION STEELS SPLITTING BY HYDRO ABRASIVE SPLITTING. Nonconventional Technologies Review, 19(1). Retrieved from http://revtn.ro/index.php/revtn/article/view/100