EXPERIMENTAL RESEARCH ON THE BEHAVIOR OF TOOL-ELECTRODES MADE OF CONDUCTIVE MATERIALS BY APPLYING DEI

  • Natalia Pinzaru Balti State University “Alecu Russo”, Moldova
Keywords: tool-electrode, conductive materials, erosion, spot electrode

Abstract

This paper presents the results of experimental research on the behavior of tool- electrodes made of copper, brass, aluminum and graphite by applying pulsed electrical discharges. The electrodes applied to the formation of the surface layers are made of conductive materials subjected to different energetic modes during the experimental investigations. The authors studied the effects that appear between the base electrodes (anode and cathode) varying the polarity and charging voltage of the capacitor while the other regimes remain constant (gap, DEI frequency, capacity and time).

References

1. Topală P., Studiul fundamental şi aplicativ al efectelor electroerozive în tehnologiile neconvenţionale. Teza de doctor habilitat în tehnică, Universitatea Tehnică a Moldovei. CZU 621.0.484.755. Chişinău, (2008).
2. Topală, P., Stoicev, P., Tehnologii de prelucrare a materialelor conductibile cu aplicarea descărcărilor electrice în impuls. Chişinău, Editura Tehnica-Info, (2008).
3. Topală, P., Slătineanu, L., Stoicev, P., Physical and chemical processes during the machining by means of the electro–erosive method. Nonconventional Technologies Review, No 1, pp. 50-54, (2010)
4. Topala, P., Cercetări privind obţinerea straturilor de depunere din pulberi metalice cu aplicarea descărcărilor electrice în impuls. Rezumatul tezei de doctorat. Bucureşti, Universitatea Politehnica. (1993).
5. Tosun, N., Cogun, C., Pihtili, H., The Efect of Cutting Parameters on Wire Crater Sizes in Wire EDM, International Advanced Manufacturing Technolology, Vol. 21, No. 10, pp. 857-865, (2003)
6. Topală, P., The energy distribuition in the gap at the gap tehnological applyng of the electrical discharges in impulses, Nonconventional Technologies Review, No.1, pp. 129 – 132, (2007).
7. Topală P., Beshliu V., Graphite deposits formation on innards surface on adhibition of electric discharges in impulses, Bulletin of the Polytehnic Institute of Iassy, Vol. LIV, pp. 105-111, (2008).
8. Cernenco, L., Snejco, L., Papanova, I., Acquisition of surfaces by means of anode-sparking electrolysis, Himia, 2, pp. 128, (1991).
9. Gavrilov, P., Lesnevski, L., Tverishin, V., Tyurin, V., Chernovski M., (2007). Micro-arc oxidation of work surfaces of technological equipment elements made of aluminum alloys. Materials of the 9th international practice conference, 10-13 April 2007, pp. 77-79, (2007).
10. Topală, P., Ghitlevich, A., Kornienko, L., Corrosive behavior of titanium with electro-sparking surfaces, Protection of metals, Vol. 29, No. 3, pp. 351-356, (1989).
11. Alai, S. et al., Practical studies in machinery. Manual for teacher training institute students, pp. 67-70, Prosveshenie, Moscow, (1979).
12. Nemoshkalenko, V., Topala, P., Tomashevskii, N., Mazanko V., Nosovskii O., Peculiarities of forming surface layers at spark discharges. Metallophysics, Vol.12, pp.132-133, (1990).
13. Lazarenko, B.P., Lazarenko, N.I., Elektricheskaia erozia metallov, Gosenergoizdat, 48, Moskva – Leningrad, (1944).
14. Lazarenko, B.P., Lazarenko, N.I., Fizika electroiskrogo obrabotki metallov, KBTI, Ministerstvo Elektropromyshlennosti, Moskva, pp. 76, (1946).
Published
2016-12-30
How to Cite
Pinzaru, N. (2016). EXPERIMENTAL RESEARCH ON THE BEHAVIOR OF TOOL-ELECTRODES MADE OF CONDUCTIVE MATERIALS BY APPLYING DEI. Nonconventional Technologies Review, 20(4). Retrieved from http://revtn.ro/index.php/revtn/article/view/126