CONSTRUCTIVE AND FUNCTIONAL CONSIDERATIONS FOR USING THERMALLY INSULATED ENCLOSURE IN 3D RESIN PRINTING PROCESS

  • Mircea Dorin Vasilescu Politehnica University Timisoara
Keywords: enclosure for printerLP 3D Printing, Arduino control system

Abstract

A comparative study is carried out in the paper, which aims to determine the need to position a 3D print inside a thermally insulated enclosure. Print the same piece under layout conditions inside an office space and then insert it inside a thermally insulated enclosure made by the author. From the point of view of temperature loss, better management of the thermal process can be achieved from the point of view of the printing process. Also at the level of the printed plane made we can see a reduction in internal tensions in the item due in particular to the temperature variations in the printing process for the printed item in the two 3D printing variants.

References

1. Denga, Y., Caob, S.J., Chenc, A., Guod, Y., The impact of manufacturing parameters on submicron particle emissions from a desktop 3D printer in the perspective of emission reduction, Building and Environment, Volume 104, 1 August 2016, pp 311-319, (2020).
2. Vasilescu, M.D., Titu, M., Comparative study between the generations of 3D printed parts by thermoplastic or optical polymerization, Nonconvențional Technologies Review, 2017, 2359-8646, vol.3, 18-23 pag, (2020).
3. Vasilescu, M.D., Influence of technological parameters on the structure and deformation of flat or round parts generated by DLP 3D printing, Nonconvențional Technologies Review, Sibiu Vol. 23, Iss. 4, (Dec 2019): 56-61, (2020).
4. Vasilescu, M.D., Influence of constructive and technological parameters at generated spiral parts with DLP 3D printing process, Revista de materiale plastice, ISSN 0025 / 5289, 4/2019, 56, 801 – 811 pag, (2020).
5. KICAD 5.0 - https://kicad-pcb.org/, (2020).
6. Steinle, P., Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings, Journal of Occupational and Environmental Hygiene, Volume 13, 2016 - Issue 2, pp. 121-132, (2020).
7. http://www.materialise.com/en/manufacturing/3d-printing-technology/fused-deposition-modeling, (2020).
8. https://www.makeitfrom.com/material-properties/Polylactic-Acid-PLA-Polylactide, 2020.
9. Fusion 360, (2020).
10. EAGLE, https://www.autodesk.com/products/eagle/overview, (2020).
Published
2020-09-30
How to Cite
Vasilescu, M. (2020). CONSTRUCTIVE AND FUNCTIONAL CONSIDERATIONS FOR USING THERMALLY INSULATED ENCLOSURE IN 3D RESIN PRINTING PROCESS. Nonconventional Technologies Review, 24(3). Retrieved from http://revtn.ro/index.php/revtn/article/view/298
Issue
Vol 24 No 3 (2020): Nonconventional Technologies Review
Section
Articles

Copyright (c) 2020 Mircea Dorin Vasilescu

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.