COMPARATIVE STUDY OF 3D PRINTING PIECES WITH FILAMENT AND POWDER

  • Caius Stanasel University of Oradea
  • Traian Buidos University of Oradea
  • Flaviu Corb University of Oradea
  • Cosmin Gheghea University of Oradea
  • Iulian Stanasel University of Oradea

Abstract

This comparative study explores the impact of 3D printing technologies using filament and powder on dimensional accuracy, within the context of Industry 4.0 and rapid prototyping. In an era where efficiency and sustainability are essential, the analysis focuses on how these methods contribute to additive manufacturing processes, facilitating the rapid development of functional prototypes. The use of 3D scanners for precise measurements allows for the evaluation of part quality, highlighting the advantages of each technology in adapting to modern industrial requirements. The study emphasizes the importance of selecting the appropriate printing technology based on project specifications, thereby promoting not only innovation but also a reduced ecological impact through optimized material and resource utilization. This research contributes to a better understanding of the role of 3D printing in transforming industrial processes and supporting a circular economy.

References

1. Name, Sure-name., Name, Sure-name., Title of the book, 5th edition, Editors eds., City, State, (2009).
2. Gibson, I., Rosen, D., & Stucker, B.. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, 2ed Edition. Springer, (2015).
3. Redwood, B., Schöffer, F., & Garret, B., The 3D Printing Handbook: Technologies, Design and Applications. 3D Hubs, (2017).
4. Gunasekaran K.N., Aravinth V., Muthu Kumaran C.B., Madhankumar, Pradeep, Kumar K., S. Investigation of mechanical properties of PLA printed materials under varying infill density, Materials Today: Proceedings,Vol.45, Part 2, ,pp.1849-1856, (2021)
5. Popescu, D., Zapciu, A., Amza, C., Baciu, F., Marinescu, R., FDM process parameters influence over the mechanical properties of polymer specimens: A review. Polymer Testing. Vol.69, pp. 157-166, Elsevier, (2018).
6. Wang, X., Jiang, M., Zhou, Z., Gou, J., Hui, D., 3D printing of polymer matrix composites: A review and prospective". Composites Part B: Engineering. Vol.110, pp. 442-458, Elsevier, (2017)
7. Schmid, M., Wegener, K., Additive Manufacturing: Polymers Applicable for Laser Sintering (LS). Procedia Engineering. Vol. 149, pp. 457-464, Elsevier, (2016).
8. Goodridge, R. D., Tuck, C. J., Hague, R. J. M.., Laser sintering of polyamides and other polymers, Progress in Materials Science. Vol. 57, Issue 2, pp. 229-267, Elsevier, (2012).
9. Verbelen, L., Dadbakhsh, S., Van den Eynde, M., Kruth, J. P., Characterization of polyamide powders for determination of laser sintering processability, European Polymer Journal. Vol. 75, pp.163-174, Elsevier, (2016).
10. Thompson, M. K., Moroni, G., Vaneker, T., et all., Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints, CIRP Annals. Vol. 65, Issue 2, pp 737-760, Elsevier, (2016).
11. Tofail, S. A., Koumoulos, E. P., Bandyopadhyay, A., et al., Additive manufacturing: scientific and technological challenges, market uptake and opportunities, Materials Today, Vol. 21, Issue 1, pp.22-37, Elsevier, (2018).
12. Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., Mülhaupt, R., Polymers for 3D Printing and Customized Additive Manufacturing, Chemical Reviews.Vol. 117 (5), ACS Publications, (2017).
13. Ford, S., Despeisse, M., Additive manufacturing and sustainability: an exploratory study of the advantages and challenges, Journal of Cleaner Production, Vol. 137, pp. 1573-1587, Elsevier, (2016).
14. Rejeski, D., Zhao, F., Huang, Y., Research needs and recommendations on environmental implications of additive manufacturing". Additive Manufacturing. Vol. 19, pp. 21-28, Elsevier, (2018)
15. ***Additive Manufacturing Research.Polymer Additive Manufacturing Markets and Applications: 2020-2029 -Online Report.
16. https://forerunner3d.com/mjf-nylon-12-pa-12/
17. https://europlas.com.vn/en-US/blog-1/pa-12-nylon-12-definition-key-features-and-common-uses
18. https://uk.eos.info/en-gb/3d-printing-materials/plastic/polyamide-pa-12-alumide
19. http://sintratec.com/3d-printing-materials/sintratec-pa12-powder/
20. https://xometry.pro/en-eu/materials/nylon-pa-12/
21. https://formlabs-media.formlabs.com/datasheets/2001447-TDS-ENUS-0.pdf
22. https://sybridge.com/polyamide-12/
Published
2025-09-30
How to Cite
Stanasel, C., Buidos, T., Corb, F., Gheghea, C., & Stanasel, I. (2025). COMPARATIVE STUDY OF 3D PRINTING PIECES WITH FILAMENT AND POWDER. Nonconventional Technologies Review, 29(3). Retrieved from http://revtn.ro/index.php/revtn/article/view/534

Most read articles by the same author(s)