A REVIEW ON MAGNETIC ABRASIVE MACHINING

  • Laurentiu Slatineanu "Gheorghe Asachi” Technical University of Iasi
  • Oana Dodun “Gheorghe Asachi” Technical University of Iaşi
  • Gheorghe Nagit “Gheorghe Asachi” Technical University of Iaşi
  • Margareta Coteata “Gheorghe Asachi” Technical University of Iaşi
  • Irina Besliu “Stefan cel Mare” University of Suceava
Keywords: magnetic abrasive machining, finishing, work principle, applications, research areas

Abstract

The magnetic abrasive machining is a machining method based on the use of the magnetic field to generate a flexible abrasive brush from abrasive and/or ferromagnetic particles. The possibility of obtaining low values for the Ra surface roughness parameter led to the use of this machining method, especially as an abrasive finishing method. Over the time, various versions of machining techniques were proposed and some of them were in detail investigated and applied in industry. When the problem of selection or application of a certain magnetic abrasive machining technique is formulated, information concerning the magnetic abrasive machining methods and techniques and their characteristics could be necessary. The documentary research activity allowed to the authors of this paper elaboration of a review on the magnetic abrasive machining/finishing, by taking into considerations information found in the accessible specialty literature. As a result, a synthetic presentation concerning some machining/finishing magnetic abrasive techniques, principles of this machining method, its applications and major research areas was elaborated.

References

1. Ahmad, S., Gangwar, S., Yadav, P.C., Singh, D.K., Optimization of process parameters affecting surface roughness in magnetic abrasive finishing process, Materials and Manufacturing Processes, 2017, available: http://www.tandfonline.com/doi/abs/10.1080/10426914.2017.1279307, accessed: 09.08.2017
2. Amitan, G.L., Baisupov, I.A., Baron, M., Bliashko, I.I., Vaghin, V.A., Volosatov, V.A., Kratysh, G.S., Lubianitskiy, G.D., Nemlov, E.F., Popov, H.M., Pugacev, S.I., Ushomirskaia, L.A., Finkelshtein, A.I., Shelesteev, A.M., Handbook for electrical machining methods (in Russian),: Mashinostroenie, Leningrad, Soviet Union, (1988).
3. Baron, Iu. M., Magnetic abrasive and magnetic machining of parts and cutting tools (in Russian), Mashinostroenie, Leningrad, Soviet Union, (1986).
4. Baron, Iu. M. Technology of abrasive machining in the magnetic field (in Russian), Mashinostroenie, Leningrad, Soviet Union, (1975).
5. Cheung, F.Y., Zhou, Z.F., Geddam, A., Li, K.Y., Cutting edge preparation using magnetic polishing and its influence on the performance of high-speed steel drills, Journal of Materials Processing Technology, Vol. 208, No., pp. 196-204, (2008).
6. Chikuba, M., Ishida, H., Method for cutting rare earth alloy, method for manufacturing rare earth alloy plates and method for manufacturing rare earth alloy magnets using wire saw, and voice coil motor, Patent USA no. US6381830B1, (1998) (https://patents.google.com/patent/ US6381830B1/en?q=magnetic&q=abrasive&q=machining), accessed: 10.08.2017.
7. Chou, S.-H., Wang, A.-C., Lin, Y.-C., Elucidating the rheological effect of gel abrasives in magnetic abrasive finishing, Procedia CIRP, Vol. 42, pp. 866-871, (2016).
8. Ciobanu, M., Researches concerning the optimizing of work parameters at magnetic abrasive finishing with ferrofluids, doctoral thesis (in Romanian). Iaşi (Romania), Polytechnic Institute, (1993).
9. Coats, H.S., Method of and apparatus for polishing containers, Patent US 2196058 A, (1938), available at: https://www.google.com/ patents/US2196058, accessed: 19.08.2017.
10. Deaconescu, T., Deaconescu, A., The magneto-abrasive finishing of complex surfaces, Nonconventional Technologies Review, Vol. 17, No. 4, pp. 31-36, (2013).
11. Deaconescu, T., Deaconescu, A., Equipment for magneto-abrasive finishing of the roller bearing balls, 6th International DAAAM Baltic Conference, Industrial Engineering, Tallinn, Estonia, (2008).
12. Deaconescu, T., Special systems and technologies (in Romanian), Cartea Universitară, București, Romania, (2005).
13. Deepak, B., Walia, R.S and Suri, N.M., Effect of rotational motion on the flat work piece magnetic abrasive finishing, International Journal of Surface Engineering & Materials Technology, Vol. 2, No. 1, pp. 50-54, (2012).
14. Fox, M., Agrawal, K., Shinmura, T., Komanduri, R., Magnetic abrasive finishing of rollers, CIRP Annals - Manufacturing Technology, Vol. 43, No. 1, pp. 181-184, (1994).
15. El-Taweel, T.A., Modelling and analysis of hybrid electrochemical turning magnetic abrasive finishing of 6061 Al/Al2O3 composite, International Journal of Advanced Manufacturing Technology, Vol. 37, No. 7-8, pp. 705-714, (2008).
16. Ganguly, V., Schmitz, T.L., Graziano, A., and Yamaguchi, H., An analysis of polishing forces in magnetic field assisted finishing, Proceedings of the ASME 2012 International Manufacturing Science and Engineering Conference, Notre Dame, 4–8 June 2012. New York: ASME, (2012)
17. Grewall, H.S., Singh, A., Singh, J.P., To study the effect of various parameters on finishing of inner surfaces of brass tubes using magnetic abrasive by RSM, ELK Asia Pacific Journals – Special Issue, 2015, available: https://www.elkjournals.com/microadmin/UploadFolder/499427p32.pdf, accessed: 03.08.2017.
18. Hashimoto, F., Yamaguchi, H., Krajnik, P., Wegener, K., Chaudhari, R., Hoffmeister, H.-W., Kuster, F., Abrasive fine-finishing technology, CIRP Annals - Manufacturing Technology, Vol. 65, No., pp. 597-620, (2016).
19. Houshi, M.N., A comprehensive review on magnetic abrasive finishing process, Advanced Engineering Forum, Vol. 18, pp. 1-20, (2016).
20. Jain, V.K., Magnetic field assisted abrasive based micro-/nano-finishing, Journal of Materials Processing Technology, Vol. 209, pp. 6022–6038, (2009).
21. Jain, V. K., Jayswal, S. C., and Dixit, P. M., Modeling and simulation of surface roughness in magnetic abrasive finishing using non-uniform surface profiles, Materials and Manufacturing Processes, Vol. 22, No. 2, pp. 256–270, (2007).
22. Jayswall, S.C., Jain, V.K., Dixit, P.M., Modeling and simulation of magnetic abrasive finishing process, International Journal of Advanced Manufacturing Technology, Vol. 26, No. pp. 477–490, (2005).
23. Joshi, R.D., Brar, G.S., Sharma, M., Effect on magnetic abrasive machining with different range of electrical parameters, International Journal of Emerging Technology and Advanced Engineering, Vol. 4, No. 9, pp. 663-668, (2014).
24. Judal, K.B., Yadava, V., Modeling and simulation of cylindrical electro-chemical magnetic abrasive machining of AISI-420 magnetic steel, Journal of Materials Processing Technology, Vol. 213, No. 12, pp. 2089-2100, (2013).
25. Kala, P., Pandey, P.M., Comparison of finishing characteristics of two paramagnetic materials using double disc magnetic abrasive finishing, Journal of Manufacturing Processes, Vol. 17 No. 1, pp. 63-77, (2015).
26. Kala, P., Pandey, P.M., Experimental study on finishing forces in double disk magnetic abrasive finishing process while finishing paramagnetic workpiece, Procedia Materials Science, Vol. 5, pp. 1677-1684, (2014).
27. Kala, P., Pandey, P.M., Verma, G.C., Sharma, V., Understanding flexible abrasive brush behavior for double disk magnetic abrasive finishing based on force signature, Journal of Manufacturing Processes, 2017, available: http://www.sciencedirect.com/science/article/pii/S1526612517300828, accessed: 19.08.2017.
28. Kala, P., Sharma, V., Pandey, P. M., Surface roughness modelling for double disk magnetic abrasive finishing process, Journal of Manufacturing Processes, Vol. 25, pp. 37-48, (2017).
29. Kang, J., George, A., Yamaguchi, H., High-speed internal finishing of capillary tubes by magnetic abrasive finishing, Procedia CIRP, Vol. 1, pp. 414-418, (2012).
30. Kanish, T.C., Kuppan, P., Narayanan, D., Ashok, S.D., Fuzzy logic based model to predict the improvement in surface roughness in magnetic field assisted abrasive finishing, Procedia Engineering, Vol. 97, pp. 1948-1956, (2014).
31. Kanish, T. C., Narayanan, S., Kuppan, P., Denis Ashok, S., Investigations on the finishing forces in Magnetic Field Assisted Abrasive Finishing of SS316L, Procedia Engineering, Vol. 174, pp. 611 – 620 (2017).
32. Karpuschewski, B., Byelyayev, O., Maiboroda, V.S., Magneto-abrasive machining for the mechanical preparation of high-speed steel twist drills, CIRP Annals - Manufacturing Technology, Vol. 58, No. 1, pp.295-298, (2009).
33. Ko, S.L., Baron, Yu.M., Park, I.J., Micro deburring for precision parts using magnetic abrasive finishing method, Journal of Materials Processing Technology, Vol. 187–188, pp. 19-25, (2007).
34. Komanduri, R., Lucca, D.A., Tani, Y. Technological advances in fine abrasive processes, Annals of the CIRP, Vol. 46, No. 2, pp. 545-596, (1997)
35. Kumar, H., Singh, S., Kumar P., Magnetic Abrasive Finishing- A Review, International Journal of Engineering Research & Technology, Vol. 2, No., 3, pp. 1-9, (2013).
36. Kwak, J.-S., Enhanced magnetic abrasive polishing of non-ferrous metals utilizing a permanent magnet, International Journal of Machine Tools & Manufacture, Vol. 49, No. 7, pp. 613-618, (2009).
37. Kwak, T.-S., Kwak, J.-S., Magnetic abrasive polishing and its application, Journal of the Korean Society for Precision Engineering, Vol. 29, No. 3, pp. 266-272, (2012).
38. Lee, J.I., Kwak, J.S., Kang, D.M., Evaluation of precision machining characteristics for map of magnesium alloy, Materials Science Forum, Vols. 610-613, pp. 1395-1402, (2009).
39. Liu, G.Y., Guo, Z.N., Jiang, S.Z., Qu, N.S., Li, Y.B., A study of processing Al 6061 with electrochemical magnetic abrasive finishing, Procedia CIRP, Vol. 14, pp. 234-238, (2014).
40. Liu, X., Jiang, Z., and Han, J., Magnetic Abrasive Finishing – A Review, Advanced Materials Research (/AMR), Vols. 418-420, pp. 1577-1581, (2011).
41. Magnetic abrasive machining (in Russian), (2014), available: https://ru.wikipedia.org/wiki/%D0%9C%D0%B0%D0%B3%D0%BD%D0%B8%D1%82%D0%BD%D0%BE-%D0%B0%D0%B1%D1%80% D0%B0%D0%B7%D0%B8%D0%B2%D0%BD%D0%B0%D1%8F_%D0%BE%D0%B1%D1%80%D0%B0%D0%B1%D0%BE%D1%82%D0%BA%D0%B0, accessed: 17.08.2017
42. Makedonski, G.V., Nikolov, V.N., Magnetic abrasive machining in developing surfaces, Nauchna Seria, Sofia, Bulgaria, (1981).
43. Ma, L., Furuki, T., Wu, W., Hirogaki, T., Aoyama, E., Estimation of unsteady and steady polishing force in magnetic abrasive finishing using a permanent magnet end-mill tool, Materials Science Forum, Vol. 874, pp. 178-183, (2016).
44. Mishra, V., Goel, H., Mulik, R.S., Pandey, P.M., Determining work-brush interface temperature in magnetic abrasive finishing process, Journal of Manufacturing Processes, Vol. 16 No. 2, pp. 248-256, (2014).
45. Misra, A., Pandey, P.M., Dixit, U.S., Modeling of material removal in ultrasonic assisted magnetic abrasive finishing process, International Journal of Mechanical Sciences, (2017), available http://ac.els-cdn.com/S002074 0317310159/1-s2.0-S0020740317310159-main.pdf?_tid=f439486a-84ca-11e7-bf0d-00000aacb35e&acdnat=1503139467_d48dd028f484a25683f7c132130b174b, accessed: 18.08.2017
46. Mohammadi, A., Azizi, A.H., Investigation on process parameters of ball screw finishing using magnetic abrasive field, Journal of Solid Mechanics in Engineering, Vol. 7, No. 3, pp. 13-21, (2014).
47. Moosa, A. A., utilizing a magnetic abrasive finishing technique (MAF) via adaptive Neuro Fuzzy (ANFIS), American Journal of Materials Engineering and Technology, Vol. 1, No.3, pp. 49-53, (2013).
48. Mori, T., Hirota, K., Kawashima, Y., Clarification of magnetic abrasive finishing mechanism, Journal of Materials Processing Technology, Vols. 143, No. 1, pp. 682-686, (2003)
49. Morozov, I.F., Tchernoglaz, B.M., Jdanovich, V.I., Mean for magnetic abrasive machining (in Russian), Patent Soviet Union, no. 347142, (1970).
50. Mulik, R.S., Pandey, P.M., Experimental investigations and optimization of ultrasonic assisted magnetic abrasive finishing process, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, vol. 225, No. 8, pp. 1347-1362, (2011).
51. Mulik, R.S., Pandey, P.M., Magnetic abrasive finishing, in Korzynski, M. (ed.), Nonconventional finishing technologies, pp. 125-140, Polish Scientific Publishers PWN, Warsaw, Poland, (2013)
52.Mulik, R.S., Pandey, P.M., Magnetic abrasive finishing of hardened AISI 52100 steel, International Journal of Advanced Manufacturing Technology, Vol. 55, No. 5, pp. 501–515, (2011).
53. Mulik, R.S., Pandey, P.M., Mechanism of Surface Finishing in Ultrasonic-Assisted Magnetic Abrasive Finishing Process, Materials and Manufacturing Processes, Vol. 25, No. 12, pp. 1418-1427, (2010).
54. Mulik, R.S., Srivastava, V., Pandey, P.M., Experimental investigations and modeling of temperature in the work-brush interface during ultrasonic assisted magnetic abrasive finishing process, Materials and Manufacturing Processes, Vol. 27, No. 1, pp. 1-9, (2912).
55. Neacșu, C. et al., Some aspects concerning the magnetic abrasive polishing (in Romanian), Construcția de Mașini, Romania, No. 4-5, (1995).
56. Nguyen, N, Tran, T., Yin, S., Chau, M., Le, D., Multi-objective optimization of improved magnetic abrasive finishing of multi-curved surfaces made of SUS202 material, International Journal of Advanced Manufacturing Technology, Vol. 88, No. 1-4, pp. 381-391, (2017).
57. Nteziyaremye, V., Wang, Y., Li, W., Shih, A., Yamaguchi, H., Surface finishing of needles for high-performance biopsy, Procedia CIRP, Vol. 14, pp. 48-53, (2014).
58. Patel, K. B., and Patel, K.M., Magnetic Abrasive Finishing of AISI52100, International Journal of Trend in Research and Development, Vol. 1, No. 1, pp. 1-8, (2014).
59. Patil, V., Ashtekar, J., Magnetic abrasive finishing, International Journal of Innovation in Engineering, Research and Technology, pp. 1-5, (ICITDCEME’15 Conference Proceedings), available: http://www.ijiert.org/admin/papers/ 1451749760_ICITDCEME-15.pdf, accessed:18.08.2017
60. Ridha, M.M.,, Yanhua, Z., Hitoshi, S., Development of a new internal finishing of tube by magnetic abrasive finishing process combined with electrochemical machining, International Journal of Mechanical Engineering and Applications, Vol. 3, No. 2, (2015).
61. Riveros, R.E., Magnetic field assisted finishing of ultra-lightweight and high-resolution mems x-ray micro-pore optics, master thesis, University of Florida, U.S.A., (2009).
62. Sakulevich F.J., Kravchenko, L.N., Kozhuro, L.M., Shimansky, V.A., Rotor-type machine for abrasive machining of parts with ferromagnetic abrasive powders in magnetic field, Patent U.S.A., no. US4211041A, 1978 (https://patents. google.com/patent/US4211041A/en?q=magnetic&q=abrasive&q=machining).
63. Satsangi, P.S., Singh, H., A Study on comparison of abrasive powders on the basis of productivity in magnetic abrasive finishing, Proceedings of the World Congress on Engineering 2016, Vol II, London, United Kingdom, (2016).
64. Sharma, M., Singh, D.P., To study the effect of various parameters on magnetic abrasive finishing, International Journal of Research in Mechanical Engineering and Technology, Vol. 3, No 2, pp. 212-215, (2013).
65. Shinmura, T., Takazawa, K., Hatano, E., Aizawa T., Study on Magnetic Abrasive Process. Finishing Characteristics. Bulletin of the Japan Society of Precision Engineering, Vol. 18, No.4, pp. 347-348, (1984).
66. Shinmura, T., Takazawa, K., Hatano, E., Aizawa T., Study on magnetic abrasive process. Application in edge finishing, Bulletin of the Japan Society of Precision Engineering, Vol. 19, No.3, pp. 218-220, (1985).
67. Shinmura, T., Takazawa, K., Hatano, E., Aizawa, T., Study on magnetic abrasive process, process principle and finishing possibility, Bulletin of the Japan Society of Precision Engineering, Vol. 19, No.1, pp. 54-55, (1985).
68. Shinmura, T., Takazawa, K., Hatano, E., Matsunaga, M., Matsuo, T., Study on magnetic abrasive finishing, CIRP Annals - Manufacturing Technology, Vol. 39, No. 1, pp. 325-32, (1990).
69. Shukla, V.C., Pandey, P.M., Dixit, U.S., Roy, A., Silberschmidt, V., Modeling of normal force and finishing torque considering shearing and ploughing effects in ultrasonic assisted magnetic abrasive finishing process with sintered magnetic abrasive powder, Wear, Vols. 390–391, pp. 11-22, (2017).
70. Sihag, N., Kala, P., Pandey, P.M., Analysis of surface finish improvement during ultrasonic assisted magnetic abrasive finishing on chemically treated tungsten substrate, Procedia Manufacturing, Vol. 10, pp. 136-146, (2017).
71. Sihag, N., Kala, P., Pandey, P.M., Chemo assisted magnetic abrasive finishing: experimental investigations, Procedia CIRP, Vol. 26, pp. 539-543, (2015).
72. Singh, D.K., Jain, V.K., Raghuram, V., Superfinishing of alloy steels using magnetic abrasive finishing process, 2003, Proceedings of the 18th Annual ASPE Meeting, 2003, available: http://citeseerx.ist.psu.edu/viewdoc/download;jsessionid=03B0BBCDA8B8BCB4C6221C4CE4FF34C5?doi=10.1.1.485.8228&rep=rep1&type=pdf, accessed: 16.08.2017.
73. Singh, D.K., Jain, V.K., Raghuram, V., Komanduri, R., Analysis of surface texture generated by a flexible magnetic abrasive brush, Wear, Vol. 259, pp. 1254–1261, (2005).
74. Singh, N., Kumar, H., Gil, J.S., Internal finishing of aluminium tube with sintered magnetic abrasive, International Journal of Engineering and Applied Sciences, Vol. 3, No. 7, pp. 76-79, (2016).
75. Singh, P., Singh, L., Optimization of magnetic abrasive finishing parameters with response surface methodology, Proceedings of the International Conference on Research and Innovations in Mechanical Engineering, pp. 273-286, (2014).
76. Slătineanu, L., Nagîţ, G., Dodun, O., Coteaţă, M., Chinesta, F., Gonçalves-Coelho, A., Pamies Teixeira J., San Juan, M., Santo, L., Santos, F., Non-traditional manufacturing processes, Editura Tehnica Info, Chişinău, Republic of Moldova, (2004).
77. Slătineanu, L., Oprișor, M.S., Nonconventional technologies. Laboratory handbook, Polytechnic Institute, Iași, Romania, (1990).
78. Slătineanu, L., Picoş, C., Pruteanu, O., Grămescu, T., Cojocaru, G., Hatman, V., Some consideration concerning the abrasive polishing using the magnetic field (in Romanian), 4th Conference of processes and equipment for cold machining, Vol. 1, pp. 71-75, Polytechnic Institute of Timișoara, Romania, (1981).
79. Slătineanu, L., Sică D., Grămescu, T., Bacalu, V., Pozson, A., Botez, R., Gâza, G. Device for abrasive polishing (in Romanian), Patent Romania, No. 90315, (1984).
80. Technological advances in fine abrasive processes, (2017), available at http://slideplayer.com/slide/10297263/, accessed: 9.08.2017.
81. Thote, S., Meshram, D., Pakhare, K., Gawande, S., Effect of the process parameters on the surface roughness during magnetic abrasive finishing process on ferromagnetic stainless steel workpieces, International Journal of Mechanical Engineering and Technology, Vol.4, No. 2, pp. 310-319, (2013).
82. Uplaonkar, A., Experimental investigation of unbonded magnetic abrasive polishing (UNMAP) silicon nitride balls, Master Thesis, Gulbarga, India, (2005).
83. Wang, Y., Hu, D., Study on the inner surface finishing of tubing by magnetic abrasive finishing, International Journal of Machine Tools & Manufacture, Vol. 45, No.1, pp. 43-49, (2005).
84. Wani, A.M., Yadava, V., Khatri, A., Simulation for the prediction of surface roughness in magnetic abrasive flow finishing (MAFF), Journal of Materials Processing Technology, Vol. 190, No. 1-3, pp. 282–290, (2007).
85. Wu, J., Zou, Y., Study on mechanism of magnetic abrasive finishing process using low - frequency alternating magnetic field, International Conference on Electromechanical Control Technology and Transportation (ICECTT 2015), pp. 116-124, (2015).
86. Wu, J., Zou, Y., Sugiyama, H., Study on ultra-precision magnetic abrasive finishing process using low frequency alternating magnetic field, Journal of Magnetism and Magnetic Materials, Vol. 386, pp. 50-59, (2015).
87. Yamaguchi, H., Srivastava, A.K., Tan, M., Hashimoto, F., Magnetic Abrasive Finishing of cutting tools for high-speed machining of titanium alloys, CIRP Journal of Manufacturing Science and Technology, Vol. 7, No. 4, pp. 299-304, (2014).
88. Yang, L.-D., Wu, K.-L., Yeh, C.-C., Lee, H.-M., Study on precision polishing technology combining electrophoresis and magnetic finishing, International Journal of Materials Science and Applications, Vol., 5, No. 6, pp. 235-240, (2016).
89. Yin, S., Shinmura, T., Vertical vibration-assisted magnetic abrasive finishing and deburring for magnesium alloy, International Journal of Machine Tools and Manufacture, Vol. 44, No. 12-13, pp. 1297-1303, (2004).
90. Yoon, S., Tu, J.-F., Lee, J.H., Yang, G.E., and Mun, S.D., Effect of the magnetic pole arrangement on the surface roughness of STS 304 by magnetic abrasive machining, International Journal of Precision Engineering and Manufacturing, Vol. 15, No. 7, pp. 1275-1281, (2014).
Published
2017-06-30
How to Cite
Slatineanu, L., Dodun, O., Nagit, G., Coteata, M., & Besliu, I. (2017). A REVIEW ON MAGNETIC ABRASIVE MACHINING. Nonconventional Technologies Review, 21(2). Retrieved from http://revtn.ro/index.php/revtn/article/view/184

Most read articles by the same author(s)

1 2 > >>